optocoreOptocore
 
Home > Products > YG2/YS2
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Datasheet
 
Manual
CompanyServiceProductsDownloadsdistributionContact

YG2/YS2 - Yamaha General Digital Audio Interface I/O Card

YG2 - Main Card

CONCEPTION. The main card YG2 includes the "heart of Optocore" allowing direct connection of Yamaha consoles to the OPTOCORE ® OPTICAL DIGITAL NETWORK SYSTEM. According to the Yamaha miniYGDAI standard, the YG2 features 16In/16Out audio channels through the console slot. The front panel offers two fibre connections, 10/100MBit Ethernet transport, RS232/USB for Optocore Software and 2x RS422 for transporting of Yamaha Remote Protocol to AD8HR. Additional daughter boards YS2 can be connected via CAT5 cables using the RJ45 "SUB" port, to enlarge the number of audio channel up to 64In/64Out (32In/32Out @ 96kHz).
To the fibre ports any Optocore device can be connected, e.g. another YG2 miniYGDAI card for consoles link or DD32(E) to connect A/D and D/A converters. The DD32(E) is equipped with RS422 In/Out for the Yamaha Remote Port connection.

please click to enlarge
Key facts:

  • 16In/16Out Audio Channels through console slot (miniYGDAI)
  • Word clock from/to YGDAI slot, from/to Network and word clock transport to any device in the network
  • 10/100 MBit Ethernet Virtual Switch to any Optocore device featuring Ethernet
  • 2 RS422 ports for direct transport of Yamaha HA Remote protocol via Optocore
  • 1 "Sub" port to connect to YS2 card for enlargement of audio channels up to 64In/64Out (32In/32Out @ 96kHz)
  • 2 pluggable optical LC Transceivers, single- or multimode is user changable
  • 1 RS232/1USB port for Optocore Control Software
  • Upgradeable internal logic



YS2 - Sub Card

CONCEPTION. The YS2 card is a cascadable daughter board for Yahama card YG2. According to the Yamaha miniYGDAI standard, the YS2 features 16In/16Out audio channels through the console slot. The front panel offers one "Main" port to connect via CAT5 cables to the RJ45 "SUB" port of a YG2 card. Through the "Sub" port of the YS2 card cascading of up to three YS2 cards is possible, to enlarge the number of audio channels up to 64In/64Out (32In/32Out @ 96kHz).

please click to enlarge
Key facts:

  • 16In/16Out Audio Channels through console slot (miniYGDAI)
  • 1 "Main" port to connect to YG2 card or YS2 card in cascade
  • 1 "Sub" port to connect to YS2 card in cascade for enlargement of audio channels up to 64In/64Out (32In/32Out @ 96kHz)
  • 1 RS232 port to upgrade internal logic



© Copyright 2010, OPTOCORE GmbH. All rights reserved.
Home | Company | Service | Products | Downloads | Distribution | Contact | Imprint - Credits & Disclaimer