optocoreOptocore
 
Home > Products > V3R-FX-INTERCOM
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Datasheet
CompanyServiceProductsDownloadsdistributionContact

V3R-FX-INTERCOM - 4 I/O Channel Clear-Com / RTS Interface for OPTOCORE and SANE

8 channels of Intercom and data, which can be routed through OPTOCORE and SANE network.

Conception: V3R-FX-INTERCOM for Clear-Com/RTS was developed to enable direct interfacing between the Optocore open transmission and Clear-Com/RTS Matrix platforms allowing for a flexible audio based intercom transport solution. It is now possible to take advantage of all Optocore system features and benefits when communicating through an Eclipse Matrix intercom system. Based on the well known V3R-FX series architecture, with 1U height, the device is equipped with standard RJ45 interfaces, making cabling simple and cost-efficient. V3R-FX-INTERCOM offers not only intercom interfacing, but can be used also as analog audio Line-In and Line-Out device.

Optocore's intercom device is seamlessly integrated into the OPTOCORE® OPTICAL DIGITAL NETWORK SYSTEM. Intercom messages and control data from Clear-Com/RTS user panel or matrix are sent transparently through the optical network. Each single intercom channel can be routed to every device in the network by the OPTOCORE CONTROL software.


V3R-FX-INTERCOM please click to enlarge
please click to enlarge

Key Facts:

  • 4 intercom duplex channels
  • RJ45 intercom I/O interfaces for matrix and for user panels
  • Fully compatible with Clear-Com/RTS devices
  • Transport of intercom audio and control data
  • Can work as 4 Line-In and 4 Line-Out converter
  • Sub D Connector with four RS485 interfaces for the exchange of control data. (e.g. RS422, RS485, DMX, MIDI) or GPI/O
  • Word clock input and output
  • 2 optical 2 Gbps LINK interface with duplex LC-connectors
  • Full remote access with OPTOCORE CONTROL software
  • Upgradeable internal logic
  • Comprehensive status control via LED banks on the front
  • Sample rates up to 192 kHz
  • 2 RJ45 Links for SANE and 10 Mbit or 100 Mbit Ethernet
  • 2 RJ45 interfaces for 10 Mbit or 100 Mbit Ethernet
  • Word clock IN and OUT
  • Embedded internal word clock for stand-alone applications
  • USB, RS232 and LAN port for configuration and control
  • Full remote access with OPTOCORE CONTROL software
  • Dual power supply with automatic switchover available



© Copyright 2010, OPTOCORE GmbH. All rights reserved.
Home | Company | Service | Products | Downloads | Distribution | Contact | Imprint - Credits & Disclaimer