 |
The software enables complete control over
an OPTOCORE network. This allows you to
connect anything to OPTOCORE which has
analog or digital in/outputs, including analog
or digital mixing consoles, loudspeaker management
systems, microphones, converters,
amplifiers, cameras, screens, computer data.
OPTOCORE Control
The software allows the configuration of and
the access to the complete network, audio,
data and video MATRIX, the naming and gainsetting
of all inputs, the provision of phantom
power for all mic inputs, the modification of
options, the storage and recall of the configuration
set-up to/from PC hard disk, as well as
the real-time level display of the individual
channels.
Supervising the Network
Working in ON-LINE mode, it is possible to
have the complete network under control, the
software advises the system manager after
every significant event, such as input over
range, fibre disconnection, RS232/USB status.
A log window will automatically pop up on
event, if desired.
Input-output, Matrix and Patch
Any input of the system can be routed to any
output by means of the ouput tag. One input
can be routed to more than one ouput.
RS485 and Video Settings
RS-485 and video patch is guaranteed by the
local setting window, locally or via the network.
Specials
The OPTOCORE control protocol can be used
by interested manufacturers or customers to
control OPTOCORE devices directly from hardware
other than a computer (mixing desks,
media controller, control boxes, etc.). This is
currently being implemented by various
manufacturers, including DiGiCo® and
Yamaha®, allowing gain/phantom control of
analog OPTOCORE devices (LX4, X6) directly
from their digital consoles.
|
|
