Standalone and networked MADI switch

512/512 fiber MADI I/O channels with SANE and high-speed Optocore fiber uplinks




M12 OPT1280 rear15

KEYFACTS:

  • Single-channel routing and MADI stream bridging
  • 8 x duplex optical MADI ports – 512 IN / 512 OUT
  • 2 x high-speed uplinks for redundant Optocore ring integration
  • 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
  • 4 x RS485/422
  • 2 x LAN
  • Word Clock I/O
  • Dual redundant PSU

Overview M12-OPT:

M12-OPT is a standalone optical MADI switch with single-channel routing and bridging capabilities. M12 can be networked and integrated with the optical OPTOCORE® and Cat5 SANE digital network systems. The unit provides eight optical duplex MADI ports, offering 512 input and 512 output digital audio channels.

The audio engine is equipped with a single channel router, enabling routing from/to any MADI stream, either within the same device or between the remote devices. M12 can be used either as an extremely powerful standalone MADI router or as multi-channel MADI interface for the Optocore fiber ring network. The M12 is additionally equipped with two SANE ports, which enable sending and receiving up to 256 audio channels via standard CAT5 cable (MADI over Cat5). SANE ports together with two LAN interfaces can be used to switch Ethernet data as well.

The M12 is the perfect main MADI hub unit for a wide range of professional audio devices with MADI inputs and outputs such as digital consoles, DAW, playback devices and professional broadcast units. The huge amount of channels exchanged by one M12 makes it the ideal and the most cost effective interface for digital console systems as well as a perfect central device offering individual channel routing feature.

Technical Specifications M12-OPT:

MADI Ports Convention AES10-1991 / AES10-2003  
Inputs Number / Connectors 8 / optical SC
  MADI digital audio channels 56 or 64 per Input
Outputs Number / Connectors 8 / optical SC
  MADI digital audio channels 56 or 64 per Output
Data rate / Wavelenght   125 Mbps / 1310nm (typical)
Max. cable length 50/125 μm 1500m / 5000ft
SANE, LAN ports Convention  
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE – 802.3 10/100 Mbit/s
Auxiliary Ports Convention EIA / TIA-485  
Data channels Digital control data 4
Data rate   Up to 10 Mbps
Impedance Termination 330 Ω
  Source ≤ 10 Ω
Word clock Hardware standard 75 Ω / BNC  
Data rate Depending on used sample rate 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz
Impedance Output 75 Ω
  Input 1k / 75 Ω software switch
Optical Link Input, Output, Dual – Full bandwidth  
Connection   Duplex LC (SFP MODULES)
Protocol   Optocore
Transmission   Full duplex
Data rate   2 x 2 Gbps
Optical wave guide cable lengths Multimode fiber 50 µm ≤ 700 m
  Monomode fiber 9 µm ≤ 120 km (on request)
Power supply 2 independent power supplies with function check and automatic switch-over
Type Switch-mode, universal input
Mains voltage 100...240VAC, 50/60Hz, 10VA-typ
Frequency 50 ... 60 Hz
Remote Control    
RS232 Convention EIA / TIA-232 R x D, T x D / 57 600 Baud
USB Port   Interface to PC
Dimensions   1 RU / 19”
W x H x D 483 x 44 x 200 mm 19.2 x 1.73 x 7.87 inch
Weight 2.83 kg 6.2 lbs

Images M12-OPT: