4 I/O Channel and 4 GPIO for OPTOCORE and SANE

8 channels of audio and data, which can be routed through OPTOCORE and SANE network.


V3R FX INTERCOM550 front

v3r ic444 550 15

KEYFACTS:

  • 4 x analog input and outputs
  • 4 x GPI and 8 x GPO transport
  • D-SUB 37 pin connectors
  • 32-bit transparent transport and routing
  • 2 x fiber SFP ports for redundant Optocore ring
  • 2 x SANE ports for MADI Cat5, X6R/V3R/Y3R-TP or LAN connectivity
  • 4 x RS485/422
  • 2 x LAN
  • Word Clock I/O
  • Dual redundant PSU

Overview V3R-FX IC444:

V3R-FX IC444 was developed to enable direct interfacing between the Optocore open transmission and Intercom platforms allowing for a flexible audio based intercom transport solution and GPIOs. It is now possible to take advantage of all Optocore system features and benefits when transport four-wire and GPIO signals. Based on the well known V3R-FX series architecture, with 1U height, the device is equipped with D-SUB 37pin interfaces, making cabling simple and cost-efficient. 

Optocore's intercom device is seamlessly integrated into the OPTOCORE® OPTICAL DIGITAL NETWORK SYSTEM. Each single intercom channel can be routed to every device in the network by the OPTOCORE CONTROL software.

Technical Specifications V3R-FX IC444:

INTERCOM ports Hardware standard: IC444 4 x inputs, 4 x outputs
Analog Line Input Impedance 10 kΩ
  Maximum input level +18 dBu
  SNR 115 dB (A-weighted)
  THD+N @ -1dBFS ≥ 100 dB
Analog Line Output Impedance 45 Ω
  Maximum input level +18 dBu
  SNR 115 dB (A-weighted)
  THD+N @ -1dBFS ≥ 98 dB
General Purpose Inputs - GPI Optically isolated  3...48V DC, 5...7mA 
General Purpose Outputs - GPO  Relay contacts  DC 30V 2A (resistive load) 
    AC 125V 0.6A (resistive load) 
Auxilary Power  +5V DC  ≥ 100mA combined per IC444 module 
  +12V AC   
SANE, LAN ports Convention  
Audio TIA – 568A/B, Optocore 200 Mbit/s
LAN TIA – 568A/B, IEEE - 802.3 10/100 Mbit/s
Auxiliary Ports Convention EIA / TIA-485  
Data channels Digital control data 4
Data rate   Up to 10 Mbps
Impedance Termination 330 Ω
  Source ≤ 10 Ω
Word clock Hardware standard 75 Ω / BNC  
Data rate Depending on used sample rate 44,1 / 48 / 88,2 / 96 / 176,4 / 192 kHz
Impedance Output 75 Ω
  Input 1k / 75 Ω software switch
Optical Link Input, Output, Dual – Full bandwidth  
Connection   Duplex LC
Protocol   Optocore
Transmission   Full duplex
Data rate   2 x 2 Gbps
Optical wave guide cable lengths Multimode fibre 50 µm ≤ 700 m
  Monomode fibre 9 µm ≤ 70 km (on request)
Word clock Hardware standard 75 Ω / BNC  
Data rate 44.1 kHz – 192 kHz  
Power supply 2 (optional) independent power supplies with function check and automatic switch-over
Type Switch-mode, universal input
Mains voltage 100...240VAC, 50/60Hz, 25VA-typ, 32VA-peak
Remote Control    
RS232 / USB / Ethernet Control Interface to PC  
Dimensions   1 RU / 19”
W x H x D 483 x 44 x 200mm 19.0 x 1.73 x 7.87 inch
Weight 2.7 kg 6.0 lbs

Images V3R-FX IC444: